Concrete Surface Profile Gauge

Product Code

0918

$$POA

PCWI Digital Surface Profile Gauge This is a low cost option for surface profile measurement. Design of unit permits accuracies equivalent to an electronic surface profile trace. Also a Pit & Crack Gauge. The miniture size (42mm diam) of this unit makes it easy to use and easy to balance on the surface. The special stepped foot and 30deg sharp needle ensures measurements meet the requirements of Austalian Standard 3894.5-2002 (Surface Profile).

Concrete Surface Profile Gauge

Product Code

0917

$$POA

PCWI Pit & Crack Gauge This digital gauge measures pits and cracks in concrete. Enables quick assessment of suface condition and the slender tip allows for depth measurement of narrow cracks.

Product Code

$$POA

Time Model TR110 Surface Roughness Tester.
Hand-held digital display of measurement in Ra(ISO) or Rz(DIN). Measures on most surfaces with a flat axis (outside and inside of cylinders and cones), grooves and recesses greater than 80mm x 30mm. Pocket size and light weight, both Ra and Rz parameters in one instrument. Piezoelectric type pickup, LCD with backlight and low battery indication display on LCD. Li-ion rechargeable battery, workable while charging.

Product Code

$$POA

Low cost 2 or 4 probe input temperature datalogger, suitable for many temperature monitoring applications such as, ovens, kilns, Freezers, as well as powder coating applications. Includes datalogger, long leaded clamp probes, software and cables. The two (2) and the four (4), ( K Type Digital thermometer ) temperature input oven logger has a large digital display.
The data logger can be used as a thermometer, with all K Type probes. The data loggers digital display will show all probes simultaneously.
Linked to your computer will give graphs and charts of the temperatures logged with printouts available.
PCWI manufactures all the probes that are listed in the temperature section of this website.

Product Code

$$POA

This is a low cost 2 or 4 probe input. Manufactured for powder coating temperature monitoring applications.
Included is, stainless steel oven cabinet, temperature datalogger / gauge, Four suitable clamp probes for powder coating ovens, software and cables.
The K Type temperature input, oven Datalogger has a large digital display, the data logger unit has the added benefit of being able to be used as a Digital thermometer with all K Type probes.
The data logger display will show all probes simultaneously.
Linked to your computer will give graphs and charts of the temperatures logged with printouts available.
PCWI manufactures all the probes that are listed in the temperature section of this website.

Product Code

0756

$$POA

PCWI Clamp Probes are available with a Large or Small clamp, clamp temperature probes suit most K type Digital thermometers and all brands of Powder coating oven data loggers.
PTFE coated wire, available with PVC or High Temp mini-plugs.
The smaller clamp has a faster response. Standard lengths are stock items, special lengths and styles made in house to your requirements. Data Sheet available.
Suits all K Type Digital Thermometers and temperature Dataloggers. Range -70 to 300°C

Inspection Mirrors

Product Code

$$POA

Inspection Mirrors - Extendable.

Telescopic Designs.
Handle extends up to 1 metre on various models.
90 x 50mm, Round 52mm diameter, Round 30mm diameter

Pit and Crack Depth Gauge

Product Code

0122, 1017

$$POA

PCWI Metric Pit & Crack depth and Corrosion Gauge.
Measures, the depth of pits, cracks and craters of the surfaces of steel structures, pipes and concrete. Enables quick assessment of surface condition. The slender tip allows for the depth measurement of narrow cracks and corrosion. An essential gauge for pipe layers/coaters, enabling them to make a quick assessment of the condition of pipework during rehabilitation.

Digital Pit and Crack Gauge 125mm foot

Product Code

0923

$$POA

PCWI Digital Metric/Imperial extended foot, Pit, Crack, Scratch and Corrosion depth Gauge. This Digital gauge measures, the depth of pits, cracks and craters of the outer (in some instances it would do the inside) surfaces of steel structures, pipes and concrete. Enables quick assessment of surface condition. The slender tip allows for the depth measurement of narrow cracks and corrosion. An essential gauge for pipe layers/coaters, enabling them to make a quick assessment of the condition of pipework during rehabilitation.
With an extended 125mm foot enabling measurement on heavily pitted work. Dial indicator can be repositioned in the end for easy measurement in corners.

PCWI Cross Hatch Cutter

Product Code

$$POA

PCWI Cross Hatch Cutters Manufactured by PCWI. Adhesion Tester complies with the requirements of AS1580 Method 408.1, BS3900-E6, ASTM 3359-B, DIM53-151 and ISO 2409. Three cutters are available: 1mm cutter, and the 11-tooth 1mm cutter, ( under 50µm), 2mm cutter (over 50µm).
Adhesion test tape to suit available.

PCWI Coating Impact Tester. Reverse impact tester

Product Code

$$POA

Also known as a drop weight tester. Surface coatings are subjected to mechanical damage by impact which can deform the coating and/or substrate. Controlled variable range of impact energy allows for coatings to be tested for elasticity, brittleness and adhesion to the substrate. The Impact Tester consists of a one metre tube fitted with a heavy base, a dropping weight (1.8kg) with a hemispherical ball indenter is fitted into the tube. The tube weight provides impact energies up to 1m/1.8kg force. Suitable for powder coating applications.

Budget 8000 Series Coating Thickness Gauge

Product Code

1023-1028

$$POA

• Low Cost Option - Microcomputer based, auto-detection of the probe type.
• Large LCD Screen, Flip display.
• Final 10 measurements in memory.
• Metric/imperial system selectable: auto power off.
• F ( Ferrous)
• FNF ( Ferrous - Non Ferrous)

PCWI Coating Thickness Standard

Product Code

0119, 0120, 0525

$$POA

Calibration standards are a benchmark for checking and calibrating your Coating Thickness/Paint gauge and for your Quality Assurance Coating Procedures. Complies with the requirements of Australian Standard AS3894.3-2002. For calibrating and checking the accuracy of all coating thickness gauges/instruments. Ferrous and Non-ferrous Coating Thickness Standards show both combined imperial/metric ranges, with plate sizes from 6µm to 12.5mm. Supplied with NATA Endorsed Certificates and recertification is available. These International Standards are Proudly Manufactured in Australia by PCWI.

PCWI Measured Calibration Films

Product Code

0115-0118

$$POA

These Calibration Films are available in Through-colour or Clear (the colour will not scratch off like colour-painted films). PCWI Measured Calibration Films are a Benchmark for Calibrating your Coating Thickness gauges and for your Quality Assurance (QA) Coating Procedures. Complies with the requirements of Australian Standard AS3894.3-2002. Also for calibrating and checking the accuracy of digital coating thickness gauges and instruments (not for manual magnetic gauges). PCWI Measured Calibration Films are available in Working Films sets and Certified sets. They are available in various sizes of your choice. These Films are a low cost alternative to the Calibration Standards, although not in the long term as they cannot be recertified.  Only Certified Films Sets are supplied with NATA Endorsed Report

Australian Zero Plates

Product Code

0272, 0273

$$POA

PCWI Australian Zero Plates.
These Plates are used for setting a Benchmak zero on your Digital Coating Thickness / paint Gauge, and for your Quality Assurance QA Coating Procedures. These are made as Ferrous (steel), or Non-ferrous (aluminium). Use the Australian Zero Plates under your Calibration films. Complies with the requirements of Australian Standard AS3894.3-2002. Manufactured in Australia by PCWI.

SPY® Detector Accessory Kit

$$POA

SPY® Porosity Detector Accessory Kit.
Supplied with Probe handle for the detector with a flexible lead (to which the handle and brushes attach), carry strap, fan brush, 60mm connector and coil joiner.
A combination of the lead and carry strap enables the full range of PCWI Compact Detector accessories to be used with SPY® Detectors allowing greater operator flexibility and mobility. Manufactured in Australia by PCWI.
A complete service & repair facility is available for ALL brands of holiday/porosity detectors (spark testers/jeepers) and accessories.

Holiday Detector Internal Pipeline Spiral Wound Brushes

$$POA

Holiday Detector Internal Pipeline Spiral Wound Brushes.
Suitable for all High Voltage Porosity detectors, holiday detectors, spark testers and jeepers.
Sizes from 30mm to 110mm.
larger sizes are open disks.

Holiday Detector Internal Pipeline Disc Brushes

$$POA

Holiday Detector Internal Pipeline Disc Brushes.
Sizes from 100mm to 500mm. Smaller brushes are spiral wound.
For larger sizes up to 2 metres pls contact us. Large sizes made to order.
1/2 and 1/3 circumference brushes also available.
Suitable for all High Voltage Porosity detectors, holiday detectors, spark testers and jeepers.

Holiday Detector Pipeline Coils

$$POA

PCWI Holiday Detector Pipeline Coils.
Suitable for all High Voltage Porosity detectors, holiday detectors, spark testers and jeepers, Special no sag design.
Sizes from 50mm. Coil joiners and handle extension pieces available.

Holiday Detector External Rolling Pipeline Brushes

$$POA

Holiday Detector External Rolling Pipeline Brushes.
Suitable for all High Voltage Porosity detectors, holiday detectors, spark testers and jeepers.
Sizes from 25mm to 600mm or custom made as required.
Roller wheel mounted. Lightweight. Rolls easily over joints.
Moves easily around bends. Splits for easy fitting.
1/2 circle or 1/3 circle brushes also available.

$$POA

Holiday Detector Flat Brushes and Holiday / Porosity detector Accessories.
Flat brass wire brushes 50mm to 600mm, Fan brushes and handle extension pieces also available.
Suitable for all High Voltage Porosity detectors, holiday detectors, spark testers and jeepers.

Product Code

$$POA

Holiday Detector High Voltage Pulse Crest Meter.
For verifying output voltage and the calibration of Pulse Type Porosity and Holiday Detectors.
Suitable for PCWI Pulse Compact Detectors ONLY.
Range 5 to 30kV. 100V Resolution. Traceable Certification (to 20kV) available.
Proudly manufactured in Australia by PCWI.

Product Code

$$POA

Holiday Detector High Voltage DC Crest Meter.
For verifying output voltage and the calibration of High Voltage DC Porosity Detectors and Holiday Detectors.
0 to 30kV (auto ranging) Certification available.
Proudly manufactured in Australia by PCWI.

Product Code

$$POA

Elcometer® Model 136/PCWI Compact Porosity Detector.
This popular Holiday detector is now superseded Elcometer® Model 136/PCWI Compact holiday Detector.
We still have low cost spare parts readily available, such as;
High voltage handle & lead, cases, neon holders, replacement batteries and all electronics.
These High Voltage holiday Detectors are serviced by PCWI.Product Description

Product Code

$$POA

PCWI Compact Wet Sponge Tester.
This Holiday detector uses the low voltage wet sponge method to detect pinholes in coatings. Model available: 9, 67,5 and 90 volt Selectable.
Large sponge head & telescopic handle which extends to 1.2m.
We highly recommend high voltage holiday and porosity testing in lieu of wet sponge testing when working with coatings over 150µm, or coatings in corrosive environments. Complies with the requirements of AS3894.1-2002 (Wet Sponge Testing). CE Compliant. Proudly manufactured in Australia by PCWI.

Product Code

$$POA

PCWI Compact Inspector Porosity Detector. Superior porosity detection, holiday detection. Portable single hand held unit, designed with the inspector in mind. Unit weighs only 460g. Two models: up to 10kV; or up to 20kV using the extended use power pack. Commonly known as holiday detectors, spark testers, porosimeters or jeepers. For sale outside of Australia only.

Product Code

$$POA

PCWI Compact Pulse Porosity Detector. This Holiday Detector is fully adjustable, has regulated 'pulsed' output up to 20kV, 40kV or 60kV. All pulse models can be used for porosity and holiday testing of carbon impregnated coatings such as carbonated rubber, thick coatings such as rubber linings and on ‘plastic’/fibreglass type coatings likely to become electrostatically charged.
The Pulse 20kV & 40kV models are ideal for use in moist conditions, on wet and contaminated coating surfaces.
The Pulse 60kV model is the only portable battery operated model on the market capable of generating voltages from 10,000 to 60,000 volts. Commonly known as holiday detectors, spark testers, porosimeters or jeepers. Proudly manufactured in Australia by PCWI.

Product Code

$$POA

The PCWI Compact Holiday Detector (previously Hi-Lighter).
Porosity detector is a small and lightweight Unit with a clip-on battery pack, and features: digital display of applied voltage; constant test current, fully adjustable voltage and sensitivity controls.
It can be used in most applications including pipelines, steel structures and tank work. Commonly known as holiday detectors, spark testers, porosimeters or jeepers. Complies with the requirements of AS3894.1-2002. CE Compliant. Proudly manufactured in Australia by PCWI.

Product Code

$$POA

These wet film combs are used to measure the wet film thickness of a coating prior to it curing, drying or solvents flashing off. These WFT Combs are made of a hard marine grade aluminium and anodised. Lettering is punched in and not printed on, Min order, 10 per pack. Personalised wet film combs available (min 1000).

PCWI Ultrasonic Thickness Gauge Calibration Blocks

Product Code

$$POA

PCWI Ultrasonic Thickness Gauge Calibration Blocks. A series of individual steel blocks for checking the linearity of ultrasonic thickness gauges and flaw detectors. Supplied with certification traceable to NMIA (Australia)& NIST (USA)Certified Equipment. Each block is corrosion protected by flash coating to stop surface rusting. Measured to 0.0001mm. Supplied in a sturdy PVC case. Manufactured by PCWI.

Product Code

$$POA

PCWI Surface Profile Needle Gauge.
The only Profile Needle Gauge that complies with the requirements of AS3894.5-2002 (Surface Profile), and as far as we can ascertain it is the only gauge available within Australia which complies with the requirements of this Standard. Gives maximum peak to average valley height.

Product Code

$$POA

Analog or digital Dial Gauge For
Testex Profile Replica Tape
Available as Digital Metric - Imperial. Analog Metric.
The gauge is used with testex tape to indicate peak to valley surface profile height / thickness.

Product Code

$$POA

*NEW MODEL COMING** Surface Salts Tester Indicator By PCWI P/L.
The meter digitally indicates the presence of surface salt contamination.
Simple and easy to use for any surface.
This Salts indicator gives a fast on the spot reading of surface salt contamination.
Works on both painted and abrasive blasted surfaces. Ideal for testing of surfaces prior to topcoating and recoating, surfaces that have become and or are contaminated, such as all surfaces close to oceananic environments.
Kit comes with, Indicator, Pad holder and 100 test pads. This is a low cost option for indicating the presence of surface salt contamination.

Product Code

$$POA

PCWI Surface Analysis Kit.
Provides analysis of freshly cleaned and or blast-cleaned surfaces. Detects chloride ions, pH and soluble ferrous ions. Includes de-ionizing equipment, titration strips, swabs and litmus paper. Works on both painted and abrasive blasted surfaces. Ideal for testing of surfaces prior to top-coating and recoating, surfaces that have become and or are contaminated, such as all surfaces close to oceananic environments.

Product Code

$$POA

Temperature Data Logger.
Can be used as a Digital thermometer, Temperature gauge or pyrometer. This is a data-logging / monitoring digital thermometer suitable for most temperature measurement applications. Four probe input, K type thermocouple, A complete Oven data logger Kit is available, including stainless steel protective enclosure - see Temperature/Oven Loggers. Can be used as a temperature gauge. See the additional probe photos.>>>

Product Code

0796

$$POA

PCWI Small Tip Probe 0796.
Fast Response small area, suitable for welds, steel hot plates and tyres etc. Suits all K Type Digital Thermometers and temperature Data-loggers. Temperature range -50ºC to 600°C.

Product Code

0262

$$POA

PCWI Air Temperature Probe 0262.
Temperature measurement of air and non explosive gases, flue gases, ducts in air conditioning systems. Suits all K Type Digital Thermometers and temperature Dataloggers.

Product Code

0267

$$POA

PCWI High Temp Heavy Duty 0267.
This is a Robust Fast response probe for temperature of solid plates, pipes, furnaces or moulds. -80°C to 800°C.
Supplied with one metre lead and mini plug. Suit all K Type digital Thermometers and temperature Dataloggers. Manufactured by PCWI

Product Code

$$POA

PCWI General Immersion Probes
For measuring temperature of liquids and gases.
Suits all K Type Digital Thermometers and temperature Dataloggers. -200 to 1000°C.

Product Code

0670

$$POA

PCWI Magnetic Surface Probe
Fast Response. Plastic Casing. Temperature range 0 to 150°C. Magnetic surface temperature probe on steel, the probe can be used as a hand held fast response temperature probe on all surfaces.
For measuring Surface temperature of containers holding liquids, gases, tyres and structures. Suits all K Type Digital Thermometers and temperature Dataloggers. This is a fast response tyre and surface temperature probe Pat No 132161.

$$POA

PCWI Stainless Steel encased probes.
To suit special temperature requirements.
These Immersion Probes come in varying diameters and lengths.
Provide your probe requirements and we will manufacture to order. Some sizes are held in stock.

For temperature of liquids, gases and molten Zinc.
Suits all K Type Digital Thermometers and temperature Data-loggers. Handle available.

Product Code

0263

$$POA

PCWI Penetration Probe 0263
For temperature measurement of semi frozen meat, food, soft rubber or liquid products.
Suits all K Type Digital Thermometers and temperature Data-loggers. -100 to 850°C.

Product Code

0264

$$POA

PCWI Magnetic Surface Probe 0264.
Fast Response. Aluminium Casing. Temperature range -20 to 300°C. 20mm diameter.
Contact strip 7mm x 19mm. 1.0 metre lead with mini plug, longer lengths made to order.
Suits all K Type Digital Thermometers and temperature Dataloggers. Suitable for inside ovens.

Product Code

0524

$$POA

PCWI Rolling Surfaces Probe. Code: 0524
Flexible face probe easy to hold handle.
The probe is used for measuring temperature of; exhaust manifolds, curved surfaces, pipe, belting, rollers, shafting, moving or rolling surfaces such as pipe coating processes.
Suits all K Type Digital Thermometers and temperature Dataloggers. Temp Range: -70 to 300°C

Product Code

0875

$$POA

PCWI Rolling Surfaces Extension Probe. Code: 0875
Flexible face probe includes a telescopic handle which extends to 1.2 metres.
The probe is used for temperature of; exhaust manifolds, pipe, belting, rollers, shafting, moving or rolling surfaces such as pipe coating processes. Suits all K Type Digital Thermometers and temperature Dataloggers. Temp Range: -70 to 300°C